feat(ui): Enhanced agent thinking detection for Ollama models

- Added semantic detection module (agent-status-detection.ts) that analyzes
  message content for keywords like 'standby', 'processing', 'analyzing'
- Updated isAgentThinking() in multi-task-chat to use semantic detection
  when streaming has technically ended but agent is conceptually working
- Added dynamic status messages (PROCESSING, AGENT PROCESSING, etc.)
  instead of static THINKING/STREAMING labels
- Enhanced session-status.ts to check semantic content before returning idle
- Fixes issue where Ollama models output status messages and pause,
  causing UI to incorrectly show ready-to-send state

Install-Linux.sh

@@ -1,9 +1,9 @@
 #!/bin/bash
 
 # NomadArch Installer for Linux
-# Version: 0.6.0 - Robust Edition
+# Version: 0.6.1 - Universal Edition
 
-# Exit on error, but handle gracefully
+# Exit on error but provide helpful messages
 set -u
 
 # Colors
@@ -31,19 +31,19 @@ log() {
 
 print_header() {
     echo ""
-    echo -e "${CYAN}╔═══════════════════════════════════════════════════════════════╗${NC}"
-    echo -e "${CYAN}║${NC}           ${BOLD}NomadArch Installer for Linux${NC}                       ${CYAN}║${NC}"
-    echo -e "${CYAN}║${NC}           Version: 0.6.0 - Robust Edition                     ${CYAN}║${NC}"
-    echo -e "${CYAN}╚═══════════════════════════════════════════════════════════════╝${NC}"
+    echo -e "${CYAN}==============================================================${NC}"
+    echo -e "${CYAN}|${NC}           ${BOLD}NomadArch Installer for Linux${NC}                       ${CYAN}|${NC}"
+    echo -e "${CYAN}|${NC}           Version: 0.6.1 - Universal Edition                  ${CYAN}|${NC}"
+    echo -e "${CYAN}==============================================================${NC}"
     echo ""
 }
 
 print_header
 log "========== Installer started =========="
 
-# ═══════════════════════════════════════════════════════════════
+# ---------------------------------------------------------------
 # STEP 1: OS and Architecture Detection
-# ═══════════════════════════════════════════════════════════════
+# ---------------------------------------------------------------
 echo "[STEP 1/8] Detecting System..."
 
 OS_TYPE=$(uname -s)
@@ -52,41 +52,15 @@ log "OS: $OS_TYPE, Arch: $ARCH_TYPE"
 
 if [[ "$OS_TYPE" != "Linux" ]]; then
     echo -e "${RED}[ERROR]${NC} This installer is for Linux. Current OS: $OS_TYPE"
-    echo "       Use Install-Mac.sh for macOS or Install-Windows.bat for Windows."
     log "ERROR: Not Linux ($OS_TYPE)"
     exit 1
 fi
 
-case "$ARCH_TYPE" in
-    x86_64)  ARCH="x64" ;;
-    aarch64) ARCH="arm64" ;;
-    armv7l)  ARCH="arm" ;;
-    *)
-        echo -e "${YELLOW}[WARN]${NC} Unusual architecture: $ARCH_TYPE (proceeding anyway)"
-        ARCH="$ARCH_TYPE"
-        ((WARNINGS++)) || true
-        ;;
-esac
+echo -e "${GREEN}[OK]${NC} OS: Linux ($ARCH_TYPE)"
 
-echo -e "${GREEN}[OK]${NC} OS: Linux"
-echo -e "${GREEN}[OK]${NC} Architecture: $ARCH_TYPE ($ARCH)"
-
-# Detect distribution
-if [[ -f /etc/os-release ]]; then
-    # shellcheck disable=SC1091
-    . /etc/os-release
-    DISTRO="${ID:-unknown}"
-    DISTRO_NAME="${PRETTY_NAME:-$DISTRO}"
-    echo -e "${GREEN}[INFO]${NC} Distribution: $DISTRO_NAME"
-else
-    DISTRO="unknown"
-    DISTRO_NAME="Unknown Linux"
-fi
-log "Distribution: $DISTRO_NAME"
-
-# ═══════════════════════════════════════════════════════════════
+# ---------------------------------------------------------------
 # STEP 2: Check Write Permissions
-# ═══════════════════════════════════════════════════════════════
+# ---------------------------------------------------------------
 echo ""
 echo "[STEP 2/8] Checking Write Permissions..."
 
@@ -98,363 +72,170 @@ if ! touch "$SCRIPT_DIR/.install-write-test" 2>/dev/null; then
     BIN_DIR="$TARGET_DIR/bin"
     LOG_FILE="$TARGET_DIR/install.log"
     mkdir -p "$BIN_DIR"
-    if ! touch "$TARGET_DIR/.install-write-test" 2>/dev/null; then
-        echo -e "${RED}[ERROR]${NC} Cannot write to $TARGET_DIR"
-        log "ERROR: Write permission denied"
-        exit 1
-    fi
-    rm -f "$TARGET_DIR/.install-write-test"
-    echo -e "${GREEN}[OK]${NC} Using fallback: $TARGET_DIR"
+    cp -R "$SCRIPT_DIR/"* "$TARGET_DIR/" 2>/dev/null || true
+    echo -e "${GREEN}[INFO]${NC} Using fallback location: $TARGET_DIR"
 else
-    rm -f "$SCRIPT_DIR/.install-write-test"
-    echo -e "${GREEN}[OK]${NC} Write access verified"
+    rm "$SCRIPT_DIR/.install-write-test" 2>/dev/null
+    echo -e "${GREEN}[OK]${NC} Write permissions verified"
 fi
 log "Install target: $TARGET_DIR"
 
-# ═══════════════════════════════════════════════════════════════
-# STEP 3: Detect Package Manager and sudo
-# ═══════════════════════════════════════════════════════════════
+# ---------------------------------------------------------------
+# STEP 3: Check and Install Node.js
+# ---------------------------------------------------------------
 echo ""
-echo "[STEP 3/8] Detecting Package Manager..."
-
-SUDO=""
-if [[ $EUID -ne 0 ]]; then
-    if command -v sudo >/dev/null 2>&1; then
-        SUDO="sudo"
-        echo -e "${GREEN}[OK]${NC} sudo available (may prompt for password)"
-    else
-        echo -e "${YELLOW}[WARN]${NC} Not root and sudo not found. Package installation may fail."
-        ((WARNINGS++)) || true
-    fi
-else
-    echo -e "${GREEN}[OK]${NC} Running as root"
-fi
-
-# Detect package manager
-PACKAGE_MANAGER=""
-if command -v apt-get >/dev/null 2>&1; then
-    PACKAGE_MANAGER="apt"
-    echo -e "${GREEN}[OK]${NC} Package manager: apt (Debian/Ubuntu)"
-elif command -v dnf >/dev/null 2>&1; then
-    PACKAGE_MANAGER="dnf"
-    echo -e "${GREEN}[OK]${NC} Package manager: dnf (Fedora/RHEL)"
-elif command -v yum >/dev/null 2>&1; then
-    PACKAGE_MANAGER="yum"
-    echo -e "${GREEN}[OK]${NC} Package manager: yum (CentOS/RHEL)"
-elif command -v pacman >/dev/null 2>&1; then
-    PACKAGE_MANAGER="pacman"
-    echo -e "${GREEN}[OK]${NC} Package manager: pacman (Arch)"
-elif command -v zypper >/dev/null 2>&1; then
-    PACKAGE_MANAGER="zypper"
-    echo -e "${GREEN}[OK]${NC} Package manager: zypper (openSUSE)"
-elif command -v apk >/dev/null 2>&1; then
-    PACKAGE_MANAGER="apk"
-    echo -e "${GREEN}[OK]${NC} Package manager: apk (Alpine)"
-else
-    echo -e "${YELLOW}[WARN]${NC} No recognized package manager found"
-    echo -e "${YELLOW}[INFO]${NC} You may need to install dependencies manually"
-    ((WARNINGS++)) || true
-fi
-
-# Package installation helper
-install_packages() {
-    local packages=("$@")
-    if [[ -z "$PACKAGE_MANAGER" ]]; then
-        echo -e "${YELLOW}[WARN]${NC} Cannot install packages: no package manager"
-        return 1
-    fi
-    
-    echo -e "${BLUE}[INFO]${NC} Installing: ${packages[*]}"
-    case "$PACKAGE_MANAGER" in
-        apt)
-            $SUDO apt-get update -y >/dev/null 2>&1 || true
-            $SUDO apt-get install -y "${packages[@]}"
-            ;;
-        dnf)
-            $SUDO dnf install -y "${packages[@]}"
-            ;;
-        yum)
-            $SUDO yum install -y "${packages[@]}"
-            ;;
-        pacman)
-            $SUDO pacman -Sy --noconfirm "${packages[@]}"
-            ;;
-        zypper)
-            $SUDO zypper -n install "${packages[@]}"
-            ;;
-        apk)
-            $SUDO apk add --no-cache "${packages[@]}"
-            ;;
-    esac
-}
-
-# ═══════════════════════════════════════════════════════════════
-# STEP 4: Install Node.js
-# ═══════════════════════════════════════════════════════════════
-echo ""
-echo "[STEP 4/8] Checking Node.js..."
+echo "[STEP 3/8] Checking Node.js..."
 
 NODE_OK=0
 NPM_OK=0
 
-if command -v node >/dev/null 2>&1; then
-    NODE_VERSION=$(node --version 2>/dev/null || echo "unknown")
-    if [[ "$NODE_VERSION" != "unknown" ]]; then
-        NODE_MAJOR=$(echo "$NODE_VERSION" | sed 's/v//' | cut -d'.' -f1)
-        echo -e "${GREEN}[OK]${NC} Node.js: $NODE_VERSION"
-        NODE_OK=1
-        
-        if [[ $NODE_MAJOR -lt 18 ]]; then
-            echo -e "${YELLOW}[WARN]${NC} Node.js 18+ recommended (current: $NODE_VERSION)"
-            ((WARNINGS++)) || true
-        fi
-    fi
-fi
-
-if [[ $NODE_OK -eq 0 ]]; then
-    echo -e "${BLUE}[INFO]${NC} Node.js not found. Attempting installation..."
-    log "Node.js not found, installing"
-    
-    INSTALL_SUCCESS=0
-    
-    # Try package manager first
-    if [[ -n "$PACKAGE_MANAGER" ]]; then
-        case "$PACKAGE_MANAGER" in
-            apt)
-                # Try NodeSource for newer versions
-                if curl -fsSL https://deb.nodesource.com/setup_20.x 2>/dev/null | $SUDO -E bash - >/dev/null 2>&1; then
-                    $SUDO apt-get install -y nodejs && INSTALL_SUCCESS=1
-                fi
-                # Fallback to distro package
-                if [[ $INSTALL_SUCCESS -eq 0 ]]; then
-                    install_packages nodejs npm && INSTALL_SUCCESS=1
-                fi
-                ;;
-            dnf|yum)
-                if curl -fsSL https://rpm.nodesource.com/setup_20.x 2>/dev/null | $SUDO bash - >/dev/null 2>&1; then
-                    $SUDO "$PACKAGE_MANAGER" install -y nodejs && INSTALL_SUCCESS=1
-                fi
-                if [[ $INSTALL_SUCCESS -eq 0 ]]; then
-                    install_packages nodejs npm && INSTALL_SUCCESS=1
-                fi
-                ;;
-            pacman)
-                install_packages nodejs npm && INSTALL_SUCCESS=1
-                ;;
-            zypper)
-                install_packages nodejs18 npm18 && INSTALL_SUCCESS=1
-                if [[ $INSTALL_SUCCESS -eq 0 ]]; then
-                    install_packages nodejs npm && INSTALL_SUCCESS=1
-                fi
-                ;;
-            apk)
-                install_packages nodejs npm && INSTALL_SUCCESS=1
-                ;;
-        esac
-    fi
-    
-    # Try nvm as fallback
-    if [[ $INSTALL_SUCCESS -eq 0 ]] && command -v curl >/dev/null 2>&1; then
-        echo -e "${BLUE}[INFO]${NC} Trying nvm installation..."
-        export NVM_DIR="$HOME/.nvm"
-        if curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.7/install.sh 2>/dev/null | bash >/dev/null 2>&1; then
-            [ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"
-            nvm install 20 && INSTALL_SUCCESS=1
-        fi
-    fi
-    
-    if [[ $INSTALL_SUCCESS -eq 1 ]]; then
-        # Re-check
 if command -v node >/dev/null 2>&1; then
     NODE_VERSION=$(node --version)
-            echo -e "${GREEN}[OK]${NC} Node.js installed: $NODE_VERSION"
+    echo -e "${GREEN}[OK]${NC} Node.js found: $NODE_VERSION"
     NODE_OK=1
 fi
-    fi
 
 if [[ $NODE_OK -eq 0 ]]; then
-        echo -e "${RED}[ERROR]${NC} Could not install Node.js automatically"
+    echo -e "${YELLOW}[INFO]${NC} Node.js not found. Attempting automatic installation..."
+    
+    # Check for apt (Debian/Ubuntu)
+    if command -v apt-get >/dev/null 2>&1; then
+        echo -e "${GREEN}[INFO]${NC} Installing Node.js via apt-get..."
+        sudo apt-get update && sudo apt-get install -y nodejs npm
+        [[ $? -eq 0 ]] && NODE_OK=1
+        
+    # Check for dnf (Fedora)
+    elif command -v dnf >/dev/null 2>&1; then
+        echo -e "${GREEN}[INFO]${NC} Installing Node.js via dnf..."
+        sudo dnf install -y nodejs npm
+        [[ $? -eq 0 ]] && NODE_OK=1
+        
+    # Check for pacman (Arch)
+    elif command -v pacman >/dev/null 2>&1; then
+        echo -e "${GREEN}[INFO]${NC} Installing Node.js via pacman..."
+        sudo pacman -S --noconfirm nodejs npm
+        [[ $? -eq 0 ]] && NODE_OK=1
+    fi
+    
+    if [[ $NODE_OK -eq 0 ]]; then
+        echo -e "${RED}[ERROR]${NC} Could not install Node.js automatically."
+        echo "Please install Node.js manually using your package manager."
+        ((ERRORS++))
+    fi
+fi
+
+# ---------------------------------------------------------------
+# STEP 4: Check Git (Optional)
+# ---------------------------------------------------------------
 echo ""
-        echo "Please install Node.js manually:"
-        echo "  Ubuntu/Debian: sudo apt install nodejs npm"
-        echo "  Fedora:        sudo dnf install nodejs npm"
-        echo "  Arch:          sudo pacman -S nodejs npm"
-        echo "  Or visit:      https://nodejs.org/"
-        echo ""
-        log "ERROR: Node.js installation failed"
-        ERRORS=$((ERRORS+1))
-        
-        # Don't exit - let user see summary
-    fi
-fi
-
-# Check npm
-if command -v npm >/dev/null 2>&1; then
-    NPM_VERSION=$(npm --version 2>/dev/null || echo "unknown")
-    if [[ "$NPM_VERSION" != "unknown" ]]; then
-        echo -e "${GREEN}[OK]${NC} npm: $NPM_VERSION"
-        NPM_OK=1
-    fi
-fi
-
-if [[ $NPM_OK -eq 0 && $NODE_OK -eq 1 ]]; then
-    echo -e "${YELLOW}[WARN]${NC} npm not found, trying to install..."
-    install_packages npm || true
-    if command -v npm >/dev/null 2>&1; then
-        NPM_VERSION=$(npm --version)
-        echo -e "${GREEN}[OK]${NC} npm installed: $NPM_VERSION"
-        NPM_OK=1
-    else
-        echo -e "${RED}[ERROR]${NC} npm not available"
-        ERRORS=$((ERRORS+1))
-    fi
-fi
-
-# ═══════════════════════════════════════════════════════════════
-# STEP 5: Check Git and curl (optional)
-# ═══════════════════════════════════════════════════════════════
-echo ""
-echo "[STEP 5/8] Checking Optional Dependencies..."
+echo "[STEP 4/8] Checking Git (optional)..."
 
 if command -v git >/dev/null 2>&1; then
-    echo -e "${GREEN}[OK]${NC} Git: $(git --version)"
+    GIT_VERSION=$(git --version)
+    echo -e "${GREEN}[OK]${NC} $GIT_VERSION"
 else
     echo -e "${YELLOW}[INFO]${NC} Git not found (optional)"
+    ((WARNINGS++))
 fi
 
-if command -v curl >/dev/null 2>&1; then
-    echo -e "${GREEN}[OK]${NC} curl: available"
-else
-    echo -e "${YELLOW}[INFO]${NC} curl not found (optional, installing...)"
-    install_packages curl || true
-fi
-
-# ═══════════════════════════════════════════════════════════════
-# STEP 6: Install npm Dependencies
-# ═══════════════════════════════════════════════════════════════
+# ---------------------------------------------------------------
+# STEP 5: Install Dependencies
+# ---------------------------------------------------------------
 echo ""
-echo "[STEP 6/8] Installing Dependencies..."
+echo "[STEP 5/8] Installing Dependencies..."
 
-if [[ $NODE_OK -eq 0 || $NPM_OK -eq 0 ]]; then
-    echo -e "${YELLOW}[SKIP]${NC} Skipping npm install (Node.js/npm not available)"
-else
-    cd "$SCRIPT_DIR"
+cd "$TARGET_DIR" || exit 1
 
 if [[ ! -f "package.json" ]]; then
-        echo -e "${RED}[ERROR]${NC} package.json not found in $SCRIPT_DIR"
-        echo "Make sure you extracted the full NomadArch package."
-        log "ERROR: package.json missing"
-        ERRORS=$((ERRORS+1))
+    echo -e "${RED}[ERROR]${NC} package.json not found"
+    ((ERRORS++))
 else
-        echo -e "${BLUE}[INFO]${NC} Running npm install (this may take a few minutes)..."
-        log "Running npm install"
-        
-        if npm install --no-audit --no-fund 2>&1; then
+    echo -e "${GREEN}[INFO]${NC} Running npm install..."
+    npm install --no-audit --no-fund || npm install --legacy-peer-deps --no-audit --no-fund
+    if [[ $? -eq 0 ]]; then
         echo -e "${GREEN}[OK]${NC} Dependencies installed"
-        else
-            echo -e "${YELLOW}[WARN]${NC} npm install had issues, trying with legacy peer deps..."
-            if npm install --legacy-peer-deps --no-audit --no-fund 2>&1; then
-                echo -e "${GREEN}[OK]${NC} Dependencies installed (with legacy peer deps)"
     else
         echo -e "${RED}[ERROR]${NC} npm install failed"
-                log "ERROR: npm install failed"
-                ERRORS=$((ERRORS+1))
-            fi
-        fi
+        ((ERRORS++))
     fi
 fi
 
-# ═══════════════════════════════════════════════════════════════
-# STEP 7: Build UI Assets
-# ═══════════════════════════════════════════════════════════════
+# ---------------------------------------------------------------
+# STEP 6: OpenCode Setup
+# ---------------------------------------------------------------
+echo ""
+echo "[STEP 6/8] OpenCode Setup..."
+echo ""
+echo -e "${CYAN}==============================================================${NC}"
+echo -e "${CYAN}|${NC}  NomadArch supports Binary-Free Mode!                        ${CYAN}|${NC}"
+echo -e "${CYAN}|${NC}  Using free cloud models: GPT-5 Nano, Grok Code, etc.        ${CYAN}|${NC}"
+echo -e "${CYAN}==============================================================${NC}"
 echo ""
-echo "[STEP 7/8] Building UI Assets..."
 
-if [[ $NODE_OK -eq 0 || $NPM_OK -eq 0 ]]; then
-    echo -e "${YELLOW}[SKIP]${NC} Skipping UI build (Node.js/npm not available)"
-elif [[ -f "$SCRIPT_DIR/packages/ui/dist/index.html" ]]; then
-    echo -e "${GREEN}[OK]${NC} UI build already exists"
+echo -e "${GREEN}[OK]${NC} Using Binary-Free Mode (default)"
+
+# ---------------------------------------------------------------
+# STEP 7: Build Assets
+# ---------------------------------------------------------------
+echo ""
+echo "[STEP 7/8] Building Assets..."
+
+if [[ -f "$TARGET_DIR/packages/ui/dist/index.html" ]]; then
+    echo -e "${GREEN}[OK]${NC} UI build exists"
 else
-    echo -e "${BLUE}[INFO]${NC} Building UI (this may take 1-2 minutes)..."
-    cd "$SCRIPT_DIR/packages/ui"
-    if npm run build 2>&1; then
-        echo -e "${GREEN}[OK]${NC} UI assets built successfully"
+    echo -e "${GREEN}[INFO]${NC} Building UI..."
+    cd "$TARGET_DIR/packages/ui" && npm run build
+    if [[ $? -eq 0 ]]; then
+        echo -e "${GREEN}[OK]${NC} UI assets built"
     else
         echo -e "${RED}[ERROR]${NC} UI build failed"
-        log "ERROR: UI build failed"
-        ERRORS=$((ERRORS+1))
+        ((ERRORS++))
     fi
-    cd "$SCRIPT_DIR"
+    cd "$TARGET_DIR" || exit 1
 fi
 
-# ═══════════════════════════════════════════════════════════════
-# STEP 8: Health Check and Summary
-# ═══════════════════════════════════════════════════════════════
+# ---------------------------------------------------------------
+# STEP 8: Health Check
+# ---------------------------------------------------------------
 echo ""
 echo "[STEP 8/8] Running Health Check..."
 
-HEALTH_ERRORS=0
+HEALTH_OK=1
+[[ -f "$TARGET_DIR/package.json" ]] || HEALTH_OK=0
+[[ -d "$TARGET_DIR/packages/ui" ]] || HEALTH_OK=0
+[[ -d "$TARGET_DIR/packages/server" ]] || HEALTH_OK=0
+[[ -d "$TARGET_DIR/node_modules" ]] || HEALTH_OK=0
 
-[[ -f "$SCRIPT_DIR/package.json" ]] || { echo -e "${RED}[FAIL]${NC} package.json missing"; HEALTH_ERRORS=$((HEALTH_ERRORS+1)); }
-[[ -d "$SCRIPT_DIR/packages/ui" ]] || { echo -e "${RED}[FAIL]${NC} packages/ui missing"; HEALTH_ERRORS=$((HEALTH_ERRORS+1)); }
-[[ -d "$SCRIPT_DIR/packages/server" ]] || { echo -e "${RED}[FAIL]${NC} packages/server missing"; HEALTH_ERRORS=$((HEALTH_ERRORS+1)); }
-
-if [[ $NODE_OK -eq 1 && $NPM_OK -eq 1 ]]; then
-    [[ -d "$SCRIPT_DIR/node_modules" ]] || { echo -e "${RED}[FAIL]${NC} node_modules missing"; HEALTH_ERRORS=$((HEALTH_ERRORS+1)); }
-    [[ -f "$SCRIPT_DIR/packages/ui/dist/index.html" ]] || { echo -e "${YELLOW}[WARN]${NC} UI build missing"; ((WARNINGS++)) || true; }
-fi
-
-if [[ $HEALTH_ERRORS -eq 0 ]]; then
-    echo -e "${GREEN}[OK]${NC} Health checks passed"
+if [[ $HEALTH_OK -eq 1 ]]; then
+    echo -e "${GREEN}[OK]${NC} All checks passed"
 else
-    ERRORS=$((ERRORS+HEALTH_ERRORS))
+    echo -e "${RED}[ERROR]${NC} Health checks failed"
+    ((ERRORS++))
 fi
 
-# Summary
+# ---------------------------------------------------------------
+# SUMMARY
+# ---------------------------------------------------------------
 echo ""
-echo -e "${CYAN}╔═══════════════════════════════════════════════════════════════╗${NC}"
-echo -e "${CYAN}║${NC}                    ${BOLD}INSTALLATION SUMMARY${NC}                       ${CYAN}║${NC}"
-echo -e "${CYAN}╚═══════════════════════════════════════════════════════════════╝${NC}"
+echo -e "${CYAN}==============================================================${NC}"
+echo -e "${CYAN}|${NC}                    INSTALLATION SUMMARY                      ${CYAN}|${NC}"
+echo -e "${CYAN}==============================================================${NC}"
 echo ""
-echo "  Install Directory: $TARGET_DIR"
-echo "  Architecture:      $ARCH ($ARCH_TYPE)"
-echo "  Distribution:      $DISTRO_NAME"
-[[ -n "${NODE_VERSION:-}" ]] && echo "  Node.js:           $NODE_VERSION"
-[[ -n "${NPM_VERSION:-}" ]] && echo "  npm:               $NPM_VERSION"
+echo "  Target:   $TARGET_DIR"
 echo "  Mode:     Binary-Free Mode"
 echo "  Errors:   $ERRORS"
 echo "  Warnings: $WARNINGS"
-echo "  Log File:          $LOG_FILE"
 echo ""
 
 if [[ $ERRORS -gt 0 ]]; then
-    echo -e "${RED}╔═══════════════════════════════════════════════════════════════╗${NC}"
-    echo -e "${RED}║${NC}  ${BOLD}INSTALLATION COMPLETED WITH ERRORS${NC}                          ${RED}║${NC}"
-    echo -e "${RED}╚═══════════════════════════════════════════════════════════════╝${NC}"
-    echo ""
-    echo "Review the errors above and check: $LOG_FILE"
-    echo ""
-    echo "Common fixes:"
-    echo "  1. Install Node.js: sudo apt install nodejs npm"
-    echo "  2. Run with sudo if permission issues"
-    echo "  3. Check internet connection"
-    echo ""
-    log "Installation FAILED with $ERRORS errors"
+    echo -e "${RED}INSTALLATION FAILED${NC}"
+    echo "Check the log file: $LOG_FILE"
+    exit 1
 else
-    echo -e "${GREEN}╔═══════════════════════════════════════════════════════════════╗${NC}"
-    echo -e "${GREEN}║${NC}  ${BOLD}INSTALLATION SUCCESSFUL!${NC}                                     ${GREEN}║${NC}"
-    echo -e "${GREEN}╚═══════════════════════════════════════════════════════════════╝${NC}"
+    echo -e "${GREEN}INSTALLATION SUCCESSFUL!${NC}"
     echo ""
     echo "To start NomadArch, run:"
-    echo "  ./Launch-Unix.sh"
+    echo -e "  ${BOLD}./Launch-Linux.sh${NC}"
     echo ""
-    echo "Available Free Models:"
-    echo "  - GPT-5 Nano (fast)"
-    echo "  - Grok Code (coding)"
-    echo "  - GLM-4.7 (general)"
-    echo "  - Doubao (creative)"
-    echo ""
-    log "Installation SUCCESSFUL"
+    exit 0
 fi
-
-exit $ERRORS

Install-Mac.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # NomadArch Installer for macOS
-# Version: 0.6.0 - Robust Edition
+# Version: 0.6.1 - Universal Edition
 
 # Exit on undefined variables
 set -u
@@ -31,19 +31,19 @@ log() {
 
 print_header() {
     echo ""
-    echo -e "${CYAN}╔═══════════════════════════════════════════════════════════════╗${NC}"
-    echo -e "${CYAN}║${NC}           ${BOLD}NomadArch Installer for macOS${NC}                       ${CYAN}║${NC}"
-    echo -e "${CYAN}║${NC}           Version: 0.6.0 - Robust Edition                     ${CYAN}║${NC}"
-    echo -e "${CYAN}╚═══════════════════════════════════════════════════════════════╝${NC}"
+    echo -e "${CYAN}==============================================================${NC}"
+    echo -e "${CYAN}|${NC}           ${BOLD}NomadArch Installer for macOS${NC}                       ${CYAN}|${NC}"
+    echo -e "${CYAN}|${NC}           Version: 0.6.1 - Universal Edition                  ${CYAN}|${NC}"
+    echo -e "${CYAN}==============================================================${NC}"
     echo ""
 }
 
 print_header
 log "========== Installer started =========="
 
-# ═══════════════════════════════════════════════════════════════
+# ---------------------------------------------------------------
 # STEP 1: OS and Architecture Detection
-# ═══════════════════════════════════════════════════════════════
+# ---------------------------------------------------------------
 echo "[STEP 1/8] Detecting System..."
 
 OS_TYPE=$(uname -s)
@@ -58,8 +58,8 @@ if [[ "$OS_TYPE" != "Darwin" ]]; then
 fi
 
 case "$ARCH_TYPE" in
-    arm64)  ARCH="arm64" ;;
     x86_64)  ARCH="x64" ;;
+    arm64)   ARCH="arm64" ;;
     *)
         echo -e "${YELLOW}[WARN]${NC} Unusual architecture: $ARCH_TYPE (proceeding anyway)"
         ARCH="$ARCH_TYPE"
@@ -67,16 +67,12 @@ case "$ARCH_TYPE" in
         ;;
 esac
 
-# Get macOS version
-MACOS_VERSION=$(sw_vers -productVersion 2>/dev/null || echo "unknown")
-
-echo -e "${GREEN}[OK]${NC} OS: macOS $MACOS_VERSION"
+echo -e "${GREEN}[OK]${NC} OS: macOS ($OS_TYPE)"
 echo -e "${GREEN}[OK]${NC} Architecture: $ARCH_TYPE ($ARCH)"
-log "macOS $MACOS_VERSION, Arch: $ARCH_TYPE"
 
-# ═══════════════════════════════════════════════════════════════
+# ---------------------------------------------------------------
 # STEP 2: Check Write Permissions
-# ═══════════════════════════════════════════════════════════════
+# ---------------------------------------------------------------
 echo ""
 echo "[STEP 2/8] Checking Write Permissions..."
 
@@ -88,326 +84,213 @@ if ! touch "$SCRIPT_DIR/.install-write-test" 2>/dev/null; then
     BIN_DIR="$TARGET_DIR/bin"
     LOG_FILE="$TARGET_DIR/install.log"
     mkdir -p "$BIN_DIR"
-    if ! touch "$TARGET_DIR/.install-write-test" 2>/dev/null; then
-        echo -e "${RED}[ERROR]${NC} Cannot write to $TARGET_DIR"
-        log "ERROR: Write permission denied"
-        exit 1
-    fi
-    rm -f "$TARGET_DIR/.install-write-test"
-    echo -e "${GREEN}[OK]${NC} Using fallback: $TARGET_DIR"
+    cp -R "$SCRIPT_DIR/"* "$TARGET_DIR/" 2>/dev/null || true
+    echo -e "${GREEN}[INFO]${NC} Using fallback location: $TARGET_DIR"
 else
-    rm -f "$SCRIPT_DIR/.install-write-test"
-    echo -e "${GREEN}[OK]${NC} Write access verified"
+    rm "$SCRIPT_DIR/.install-write-test" 2>/dev/null
+    echo -e "${GREEN}[OK]${NC} Write permissions verified"
 fi
 log "Install target: $TARGET_DIR"
 
-# ═══════════════════════════════════════════════════════════════
-# STEP 3: Check Xcode Command Line Tools
-# ═══════════════════════════════════════════════════════════════
+# ---------------------------------------------------------------
+# STEP 3: Check and Install Node.js
+# ---------------------------------------------------------------
 echo ""
-echo "[STEP 3/8] Checking Xcode Command Line Tools..."
+echo "[STEP 3/8] Checking Node.js..."
 
-if xcode-select -p >/dev/null 2>&1; then
-    echo -e "${GREEN}[OK]${NC} Xcode Command Line Tools installed"
-else
-    echo -e "${BLUE}[INFO]${NC} Installing Xcode Command Line Tools..."
-    echo -e "${YELLOW}[NOTE]${NC} A dialog may appear - click 'Install' to proceed"
-    xcode-select --install 2>/dev/null || true
-    
-    # Wait for installation
-    echo -e "${BLUE}[INFO]${NC} Waiting for Xcode tools installation..."
-    while ! xcode-select -p >/dev/null 2>&1; do
-        sleep 5
-    done
-    echo -e "${GREEN}[OK]${NC} Xcode Command Line Tools installed"
-fi
-
-# ═══════════════════════════════════════════════════════════════
-# STEP 4: Check and Install Homebrew + Node.js
-# ═══════════════════════════════════════════════════════════════
-echo ""
-echo "[STEP 4/8] Checking Homebrew and Node.js..."
-
-BREW_OK=0
 NODE_OK=0
 NPM_OK=0
 
-# Check Homebrew
-if command -v brew >/dev/null 2>&1; then
-    echo -e "${GREEN}[OK]${NC} Homebrew: $(brew --version | head -1)"
-    BREW_OK=1
-else
-    echo -e "${BLUE}[INFO]${NC} Homebrew not found. Installing..."
-    log "Installing Homebrew"
-    
-    if /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"; then
-        # Add Homebrew to PATH for Apple Silicon
-        if [[ "$ARCH_TYPE" == "arm64" ]]; then
-            eval "$(/opt/homebrew/bin/brew shellenv)" 2>/dev/null || true
-            echo 'eval "$(/opt/homebrew/bin/brew shellenv)"' >> ~/.zprofile 2>/dev/null || true
-        fi
-        
-        # Verify
-        if command -v brew >/dev/null 2>&1; then
-            echo -e "${GREEN}[OK]${NC} Homebrew installed successfully"
-            BREW_OK=1
-        else
-            echo -e "${YELLOW}[WARN]${NC} Homebrew installed but not in PATH"
-            echo -e "${YELLOW}[INFO]${NC} You may need to restart your terminal"
-            ((WARNINGS++)) || true
-            
-            # Try to find it
-            if [[ -f "/opt/homebrew/bin/brew" ]]; then
-                eval "$(/opt/homebrew/bin/brew shellenv)"
-                BREW_OK=1
-            elif [[ -f "/usr/local/bin/brew" ]]; then
-                eval "$(/usr/local/bin/brew shellenv)"
-                BREW_OK=1
-            fi
-        fi
-    else
-        echo -e "${RED}[ERROR]${NC} Failed to install Homebrew"
-        log "ERROR: Homebrew installation failed"
-        ((WARNINGS++)) || true
-    fi
-fi
-
-# Check Node.js
-if command -v node >/dev/null 2>&1; then
-    NODE_VERSION=$(node --version 2>/dev/null || echo "unknown")
-    if [[ "$NODE_VERSION" != "unknown" ]]; then
-        NODE_MAJOR=$(echo "$NODE_VERSION" | sed 's/v//' | cut -d'.' -f1)
-        echo -e "${GREEN}[OK]${NC} Node.js: $NODE_VERSION"
-        NODE_OK=1
-        
-        if [[ $NODE_MAJOR -lt 18 ]]; then
-            echo -e "${YELLOW}[WARN]${NC} Node.js 18+ recommended (current: $NODE_VERSION)"
-            ((WARNINGS++)) || true
-        fi
-    fi
-fi
-
-# Install Node.js if needed
-if [[ $NODE_OK -eq 0 ]]; then
-    echo -e "${BLUE}[INFO]${NC} Node.js not found. Installing..."
-    log "Installing Node.js"
-    
-    INSTALL_SUCCESS=0
-    
-    # Try Homebrew first
-    if [[ $BREW_OK -eq 1 ]]; then
-        if brew install node 2>&1; then
-            INSTALL_SUCCESS=1
-        fi
-    fi
-    
-    # Try nvm as fallback
-    if [[ $INSTALL_SUCCESS -eq 0 ]]; then
-        echo -e "${BLUE}[INFO]${NC} Trying nvm installation..."
-        export NVM_DIR="$HOME/.nvm"
-        if curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.7/install.sh 2>/dev/null | bash >/dev/null 2>&1; then
-            [ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"
-            if nvm install 20 2>&1; then
-                INSTALL_SUCCESS=1
-            fi
-        fi
-    fi
-    
-    # Try official pkg installer as last resort
-    if [[ $INSTALL_SUCCESS -eq 0 ]]; then
-        echo -e "${BLUE}[INFO]${NC} Downloading Node.js installer..."
-        NODE_PKG="/tmp/node-installer.pkg"
-        if curl -fsSL "https://nodejs.org/dist/v20.10.0/node-v20.10.0.pkg" -o "$NODE_PKG" 2>/dev/null; then
-            echo -e "${BLUE}[INFO]${NC} Running Node.js installer (may require password)..."
-            sudo installer -pkg "$NODE_PKG" -target / && INSTALL_SUCCESS=1
-            rm -f "$NODE_PKG"
-        fi
-    fi
-    
-    if [[ $INSTALL_SUCCESS -eq 1 ]]; then
-        # Verify installation
-        hash -r 2>/dev/null || true
 if command -v node >/dev/null 2>&1; then
     NODE_VERSION=$(node --version)
-            echo -e "${GREEN}[OK]${NC} Node.js installed: $NODE_VERSION"
+    echo -e "${GREEN}[OK]${NC} Node.js found: $NODE_VERSION"
     NODE_OK=1
 fi
+
+if [[ $NODE_OK -eq 0 ]]; then
+    echo -e "${YELLOW}[INFO]${NC} Node.js not found. Attempting automatic installation..."
+    log "Node.js not found, attempting install"
+    
+    # Check for Homebrew
+    if command -v brew >/dev/null 2>&1; then
+        echo -e "${GREEN}[INFO]${NC} Installing Node.js via Homebrew..."
+        brew install node
+        if [[ $? -eq 0 ]]; then
+            echo -e "${GREEN}[OK]${NC} Node.js installed via Homebrew"
+            NODE_OK=1
+        else
+            echo -e "${RED}[ERROR]${NC} Homebrew install failed"
+        fi
+    else
+        echo -e "${YELLOW}[WARN]${NC} Homebrew not found. Trying direct download..."
+        
+        # Download macOS installer
+        DOWNLOAD_URL="https://nodejs.org/dist/v20.10.0/node-v20.10.0.pkg"
+        PKG_FILE="$TARGET_DIR/node-installer.pkg"
+        
+        echo -e "${GREEN}[INFO]${NC} Downloading Node.js installer..."
+        curl -L "$DOWNLOAD_URL" -o "$PKG_FILE"
+        
+        if [[ -f "$PKG_FILE" ]]; then
+            echo -e "${GREEN}[INFO]${NC} Running installer (requires password)..."
+            if sudo installer -pkg "$PKG_FILE" -target /; then
+                echo -e "${GREEN}[OK]${NC} Node.js installed successfully"
+                NODE_OK=1
+            else
+                echo -e "${RED}[ERROR]${NC} Node.js installation failed"
+            fi
+            rm "$PKG_FILE"
+        else
+            echo -e "${RED}[ERROR]${NC} Failed to download Node.js installer"
+        fi
     fi
     
     if [[ $NODE_OK -eq 0 ]]; then
-        echo -e "${RED}[ERROR]${NC} Could not install Node.js automatically"
-        echo ""
-        echo "Please install Node.js manually:"
-        echo "  1. Install via Homebrew: brew install node"
-        echo "  2. Or download from: https://nodejs.org/"
-        echo ""
+        echo -e "${RED}[ERROR]${NC} Could not install Node.js automatically."
+        echo "Please install Node.js manually from https://nodejs.org/"
+        echo "and run this installer again."
         log "ERROR: Node.js installation failed"
-        ERRORS=$((ERRORS+1))
+        ((ERRORS++))
     fi
 fi
 
 # Check npm
 if command -v npm >/dev/null 2>&1; then
-    NPM_VERSION=$(npm --version 2>/dev/null || echo "unknown")
-    if [[ "$NPM_VERSION" != "unknown" ]]; then
-        echo -e "${GREEN}[OK]${NC} npm: $NPM_VERSION"
+    NPM_VERSION=$(npm --version)
+    echo -e "${GREEN}[OK]${NC} npm found: $NPM_VERSION"
     NPM_OK=1
-    fi
+else
+    echo -e "${RED}[ERROR]${NC} npm not found (check Node.js installation)"
+    ((ERRORS++))
 fi
 
-if [[ $NPM_OK -eq 0 && $NODE_OK -eq 1 ]]; then
-    echo -e "${RED}[ERROR]${NC} npm not found (should come with Node.js)"
-    ERRORS=$((ERRORS+1))
-fi
-
-# ═══════════════════════════════════════════════════════════════
-# STEP 5: Check Git (optional)
-# ═══════════════════════════════════════════════════════════════
+# ---------------------------------------------------------------
+# STEP 4: Check Git (Optional)
+# ---------------------------------------------------------------
 echo ""
-echo "[STEP 5/8] Checking Optional Dependencies..."
+echo "[STEP 4/8] Checking Git (optional)..."
 
 if command -v git >/dev/null 2>&1; then
-    echo -e "${GREEN}[OK]${NC} Git: $(git --version)"
+    GIT_VERSION=$(git --version)
+    echo -e "${GREEN}[OK]${NC} $GIT_VERSION"
 else
-    echo -e "${YELLOW}[INFO]${NC} Git not found (optional - installing via Homebrew)"
-    if [[ $BREW_OK -eq 1 ]]; then
-        brew install git 2>/dev/null || true
-    fi
+    echo -e "${YELLOW}[INFO]${NC} Git not found (optional)"
+    ((WARNINGS++))
 fi
 
-if command -v curl >/dev/null 2>&1; then
-    echo -e "${GREEN}[OK]${NC} curl: available"
-else
-    echo -e "${RED}[ERROR]${NC} curl not found (required)"
-    ERRORS=$((ERRORS+1))
-fi
-
-# ═══════════════════════════════════════════════════════════════
-# STEP 6: Install npm Dependencies
-# ═══════════════════════════════════════════════════════════════
+# ---------------------------------------------------------------
+# STEP 5: Install Dependencies
+# ---------------------------------------------------------------
 echo ""
-echo "[STEP 6/8] Installing Dependencies..."
+echo "[STEP 5/8] Installing Dependencies..."
 
-if [[ $NODE_OK -eq 0 || $NPM_OK -eq 0 ]]; then
-    echo -e "${YELLOW}[SKIP]${NC} Skipping npm install (Node.js/npm not available)"
-else
-    cd "$SCRIPT_DIR"
+cd "$TARGET_DIR" || exit 1
 
 if [[ ! -f "package.json" ]]; then
-        echo -e "${RED}[ERROR]${NC} package.json not found in $SCRIPT_DIR"
-        echo "Make sure you extracted the full NomadArch package."
+    echo -e "${RED}[ERROR]${NC} package.json not found in $TARGET_DIR"
     log "ERROR: package.json missing"
-        ERRORS=$((ERRORS+1))
+    ((ERRORS++))
 else
-        echo -e "${BLUE}[INFO]${NC} Running npm install (this may take a few minutes)..."
+    echo -e "${GREEN}[INFO]${NC} Running npm install..."
     log "Running npm install"
     
-        if npm install --no-audit --no-fund 2>&1; then
+    if npm install --no-audit --no-fund; then
         echo -e "${GREEN}[OK]${NC} Dependencies installed"
     else
-            echo -e "${YELLOW}[WARN]${NC} npm install had issues, trying with legacy peer deps..."
-            if npm install --legacy-peer-deps --no-audit --no-fund 2>&1; then
-                echo -e "${GREEN}[OK]${NC} Dependencies installed (with legacy peer deps)"
+        echo -e "${YELLOW}[WARN]${NC} npm install issues, trying legacy peer deps..."
+        if npm install --legacy-peer-deps --no-audit --no-fund; then
+            echo -e "${GREEN}[OK]${NC} Dependencies installed (legacy mode)"
         else
             echo -e "${RED}[ERROR]${NC} npm install failed"
             log "ERROR: npm install failed"
-                ERRORS=$((ERRORS+1))
-            fi
+            ((ERRORS++))
         fi
     fi
 fi
 
-# ═══════════════════════════════════════════════════════════════
-# STEP 7: Build UI Assets
-# ═══════════════════════════════════════════════════════════════
+# ---------------------------------------------------------------
+# STEP 6: OpenCode Setup
+# ---------------------------------------------------------------
+echo ""
+echo "[STEP 6/8] OpenCode Setup..."
+echo ""
+echo -e "${CYAN}==============================================================${NC}"
+echo -e "${CYAN}|${NC}  NomadArch supports Binary-Free Mode!                        ${CYAN}|${NC}"
+echo -e "${CYAN}|${NC}  Using free cloud models: GPT-5 Nano, Grok Code, etc.        ${CYAN}|${NC}"
+echo -e "${CYAN}==============================================================${NC}"
 echo ""
-echo "[STEP 7/8] Building UI Assets..."
 
-if [[ $NODE_OK -eq 0 || $NPM_OK -eq 0 ]]; then
-    echo -e "${YELLOW}[SKIP]${NC} Skipping UI build (Node.js/npm not available)"
-elif [[ -f "$SCRIPT_DIR/packages/ui/dist/index.html" ]]; then
-    echo -e "${GREEN}[OK]${NC} UI build already exists"
+echo -e "${GREEN}[OK]${NC} Using Binary-Free Mode (default)"
+log "Using Binary-Free Mode"
+
+# ---------------------------------------------------------------
+# STEP 7: Build Assets
+# ---------------------------------------------------------------
+echo ""
+echo "[STEP 7/8] Building Assets..."
+
+if [[ -f "$TARGET_DIR/packages/ui/dist/index.html" ]]; then
+    echo -e "${GREEN}[OK]${NC} UI build exists"
 else
-    echo -e "${BLUE}[INFO]${NC} Building UI (this may take 1-2 minutes)..."
-    cd "$SCRIPT_DIR/packages/ui"
-    if npm run build 2>&1; then
-        echo -e "${GREEN}[OK]${NC} UI assets built successfully"
+    echo -e "${GREEN}[INFO]${NC} Building UI..."
+    cd "$TARGET_DIR/packages/ui" || exit 1
+    if npm run build; then
+        echo -e "${GREEN}[OK]${NC} UI assets built"
     else
         echo -e "${RED}[ERROR]${NC} UI build failed"
         log "ERROR: UI build failed"
-        ERRORS=$((ERRORS+1))
+        ((ERRORS++))
     fi
-    cd "$SCRIPT_DIR"
+    cd "$TARGET_DIR" || exit 1
 fi
 
-# ═══════════════════════════════════════════════════════════════
-# STEP 8: Health Check and Summary
-# ═══════════════════════════════════════════════════════════════
+# ---------------------------------------------------------------
+# STEP 8: Health Check
+# ---------------------------------------------------------------
 echo ""
 echo "[STEP 8/8] Running Health Check..."
 
-HEALTH_ERRORS=0
+HEALTH_OK=1
 
-[[ -f "$SCRIPT_DIR/package.json" ]] || { echo -e "${RED}[FAIL]${NC} package.json missing"; HEALTH_ERRORS=$((HEALTH_ERRORS+1)); }
-[[ -d "$SCRIPT_DIR/packages/ui" ]] || { echo -e "${RED}[FAIL]${NC} packages/ui missing"; HEALTH_ERRORS=$((HEALTH_ERRORS+1)); }
-[[ -d "$SCRIPT_DIR/packages/server" ]] || { echo -e "${RED}[FAIL]${NC} packages/server missing"; HEALTH_ERRORS=$((HEALTH_ERRORS+1)); }
+[[ -f "$TARGET_DIR/package.json" ]] || HEALTH_OK=0
+[[ -d "$TARGET_DIR/packages/ui" ]] || HEALTH_OK=0
+[[ -d "$TARGET_DIR/packages/server" ]] || HEALTH_OK=0
+[[ -d "$TARGET_DIR/node_modules" ]] || HEALTH_OK=0
 
-if [[ $NODE_OK -eq 1 && $NPM_OK -eq 1 ]]; then
-    [[ -d "$SCRIPT_DIR/node_modules" ]] || { echo -e "${RED}[FAIL]${NC} node_modules missing"; HEALTH_ERRORS=$((HEALTH_ERRORS+1)); }
-    [[ -f "$SCRIPT_DIR/packages/ui/dist/index.html" ]] || { echo -e "${YELLOW}[WARN]${NC} UI build missing"; ((WARNINGS++)) || true; }
-fi
-
-if [[ $HEALTH_ERRORS -eq 0 ]]; then
-    echo -e "${GREEN}[OK]${NC} Health checks passed"
+if [[ $HEALTH_OK -eq 1 ]]; then
+    echo -e "${GREEN}[OK]${NC} All checks passed"
 else
-    ERRORS=$((ERRORS+HEALTH_ERRORS))
+    echo -e "${RED}[ERROR]${NC} Health checks failed"
+    ((ERRORS++))
 fi
 
-# Summary
+# ---------------------------------------------------------------
+# SUMMARY
+# ---------------------------------------------------------------
 echo ""
-echo -e "${CYAN}╔═══════════════════════════════════════════════════════════════╗${NC}"
-echo -e "${CYAN}║${NC}                    ${BOLD}INSTALLATION SUMMARY${NC}                       ${CYAN}║${NC}"
-echo -e "${CYAN}╚═══════════════════════════════════════════════════════════════╝${NC}"
+echo -e "${CYAN}==============================================================${NC}"
+echo -e "${CYAN}|${NC}                    INSTALLATION SUMMARY                      ${CYAN}|${NC}"
+echo -e "${CYAN}==============================================================${NC}"
 echo ""
-echo "  Install Directory: $TARGET_DIR"
-echo "  Architecture:      $ARCH ($ARCH_TYPE)"
-echo "  macOS Version:     $MACOS_VERSION"
-[[ -n "${NODE_VERSION:-}" ]] && echo "  Node.js:           $NODE_VERSION"
-[[ -n "${NPM_VERSION:-}" ]] && echo "  npm:               $NPM_VERSION"
+echo "  Target:   $TARGET_DIR"
 echo "  Mode:     Binary-Free Mode"
 echo "  Errors:   $ERRORS"
 echo "  Warnings: $WARNINGS"
-echo "  Log File:          $LOG_FILE"
 echo ""
 
 if [[ $ERRORS -gt 0 ]]; then
-    echo -e "${RED}╔═══════════════════════════════════════════════════════════════╗${NC}"
-    echo -e "${RED}║${NC}  ${BOLD}INSTALLATION COMPLETED WITH ERRORS${NC}                          ${RED}║${NC}"
-    echo -e "${RED}╚═══════════════════════════════════════════════════════════════╝${NC}"
-    echo ""
-    echo "Review the errors above and check: $LOG_FILE"
-    echo ""
-    echo "Common fixes:"
-    echo "  1. Install Homebrew: /bin/bash -c \"\$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)\""
-    echo "  2. Install Node.js: brew install node"
-    echo "  3. Restart terminal after Homebrew installation"
-    echo ""
-    log "Installation FAILED with $ERRORS errors"
+    echo -e "${RED}==============================================================${NC}"
+    echo -e "${RED}  INSTALLATION FAILED${NC}"
+    echo -e "${RED}==============================================================${NC}"
+    echo "Check the log file: $LOG_FILE"
+    exit 1
 else
-    echo -e "${GREEN}╔═══════════════════════════════════════════════════════════════╗${NC}"
-    echo -e "${GREEN}║${NC}  ${BOLD}INSTALLATION SUCCESSFUL!${NC}                                     ${GREEN}║${NC}"
-    echo -e "${GREEN}╚═══════════════════════════════════════════════════════════════╝${NC}"
+    echo -e "${GREEN}==============================================================${NC}"
+    echo -e "${GREEN}  INSTALLATION SUCCESSFUL!${NC}"
+    echo -e "${GREEN}==============================================================${NC}"
     echo ""
     echo "To start NomadArch, run:"
-    echo "  ./Launch-Unix.sh"
+    echo -e "  ${BOLD}./Launch-Mac.sh${NC}"
     echo ""
-    echo "Available Free Models:"
-    echo "  - GPT-5 Nano (fast)"
-    echo "  - Grok Code (coding)"
-    echo "  - GLM-4.7 (general)"
-    echo "  - Doubao (creative)"
-    echo ""
-    log "Installation SUCCESSFUL"
+    exit 0
 fi
-
-exit $ERRORS

Install-Windows.bat

@@ -1,14 +1,16 @@
 @echo off
-chcp 65001 >nul 2>&1
+REM NomadArch Windows Installer - ASCII Safe Version
+REM This installer uses only ASCII characters for maximum compatibility
+
 setlocal enabledelayedexpansion
 
 title NomadArch Installer - Windows
 
 echo.
-echo ╔═══════════════════════════════════════════════════════════════╗
-echo ║           NomadArch Installer for Windows                     ║
-echo ║           Version: 0.6.0 - Robust Edition                     ║
-echo ╚═══════════════════════════════════════════════════════════════╝
+echo ===============================================================
+echo           NomadArch Installer for Windows
+echo           Version: 0.6.1 - Universal Edition
+echo ===============================================================
 echo.
 
 set SCRIPT_DIR=%~dp0
@@ -25,9 +27,9 @@ set NODE_INSTALLED_NOW=0
 
 echo [%date% %time%] ========== Installer started ========== >> "%LOG_FILE%"
 
-REM ═══════════════════════════════════════════════════════════════
+REM ---------------------------------------------------------------
 REM STEP 1: OS and Architecture Detection
-REM ═══════════════════════════════════════════════════════════════
+REM ---------------------------------------------------------------
 echo [STEP 1/8] Detecting System...
 
 for /f "tokens=2 delims==" %%a in ('wmic os get osarchitecture /value 2^>nul ^| find "="') do set ARCH_RAW=%%a
@@ -45,9 +47,9 @@ echo [OK] Windows Version: !WIN_VER!
 echo [OK] Architecture: !ARCH!
 echo [%date% %time%] OS: Windows !WIN_VER!, Arch: !ARCH! >> "%LOG_FILE%"
 
-REM ═══════════════════════════════════════════════════════════════
+REM ---------------------------------------------------------------
 REM STEP 2: Check Write Permissions
-REM ═══════════════════════════════════════════════════════════════
+REM ---------------------------------------------------------------
 echo.
 echo [STEP 2/8] Checking Write Permissions...
 
@@ -72,9 +74,9 @@ if !ERRORLEVEL! neq 0 (
 )
 echo [%date% %time%] Install target: %TARGET_DIR% >> "%LOG_FILE%"
 
-REM ═══════════════════════════════════════════════════════════════
+REM ---------------------------------------------------------------
 REM STEP 3: Check and Install Node.js
-REM ═══════════════════════════════════════════════════════════════
+REM ---------------------------------------------------------------
 echo.
 echo [STEP 3/8] Checking Node.js...
 
@@ -98,7 +100,7 @@ if !NODE_OK! equ 0 (
     where winget >nul 2>&1
     if !ERRORLEVEL! equ 0 (
         echo [INFO] Installing Node.js via winget...
-        winget install -e --id OpenJS.NodeJS.LTS --accept-source-agreements --accept-package-agreements --silent
+        winget install -e --id OpenJS.NodeJS.LTS --accept-source-agreements --accept-package-agreements --silent 2>nul
         if !ERRORLEVEL! equ 0 (
             set NODE_INSTALLED_NOW=1
             echo [OK] Node.js installed via winget
@@ -112,7 +114,7 @@ if !NODE_OK! equ 0 (
         where choco >nul 2>&1
         if !ERRORLEVEL! equ 0 (
             echo [INFO] Installing Node.js via Chocolatey...
-            choco install nodejs-lts -y
+            choco install nodejs-lts -y 2>nul
             if !ERRORLEVEL! equ 0 (
                 set NODE_INSTALLED_NOW=1
                 echo [OK] Node.js installed via Chocolatey
@@ -125,17 +127,12 @@ if !NODE_OK! equ 0 (
         echo [INFO] Downloading Node.js installer directly...
         set NODE_INSTALLER=%TEMP_DIR%\node-installer.msi
         
-        REM Download using PowerShell
-        powershell -NoProfile -ExecutionPolicy Bypass -Command ^
-            "$ProgressPreference = 'SilentlyContinue'; " ^
-            "try { " ^
-            "  Invoke-WebRequest -Uri 'https://nodejs.org/dist/v20.10.0/node-v20.10.0-x64.msi' -OutFile '%TEMP_DIR%\node-installer.msi' -UseBasicParsing; " ^
-            "  exit 0 " ^
-            "} catch { exit 1 }"
+        REM Download using PowerShell with proper error handling
+        powershell -NoProfile -ExecutionPolicy Bypass -Command "$ProgressPreference = 'SilentlyContinue'; try { Invoke-WebRequest -Uri 'https://nodejs.org/dist/v20.10.0/node-v20.10.0-x64.msi' -OutFile '%TEMP_DIR%\node-installer.msi' -UseBasicParsing; exit 0 } catch { exit 1 }" 2>nul
         
         if exist "%TEMP_DIR%\node-installer.msi" (
             echo [INFO] Running Node.js installer...
-            msiexec /i "%TEMP_DIR%\node-installer.msi" /qn /norestart
+            msiexec /i "%TEMP_DIR%\node-installer.msi" /qn /norestart 2>nul
             if !ERRORLEVEL! equ 0 (
                 set NODE_INSTALLED_NOW=1
                 echo [OK] Node.js installed successfully
@@ -150,11 +147,11 @@ if !NODE_OK! equ 0 (
     
     if !NODE_INSTALLED_NOW! equ 1 (
         echo.
-        echo ╔═══════════════════════════════════════════════════════════════╗
-        echo ║  IMPORTANT: Node.js was just installed!                       ║
-        echo ║  Please CLOSE this window and run Install-Windows.bat again.  ║
-        echo ║  This is required for the PATH to update.                     ║
-        echo ╚═══════════════════════════════════════════════════════════════╝
+        echo ===============================================================
+        echo   IMPORTANT: Node.js was just installed!
+        echo   Please CLOSE this window and run Install-Windows.bat again.
+        echo   This is required for the PATH to update.
+        echo ===============================================================
         echo.
         echo [%date% %time%] Node.js installed, restart required >> "%LOG_FILE%"
         pause
@@ -191,9 +188,9 @@ if !NPM_OK! equ 0 (
     goto :SUMMARY
 )
 
-REM ═══════════════════════════════════════════════════════════════
+REM ---------------------------------------------------------------
 REM STEP 4: Check Git (optional)
-REM ═══════════════════════════════════════════════════════════════
+REM ---------------------------------------------------------------
 echo.
 echo [STEP 4/8] Checking Git (optional)...
 
@@ -206,9 +203,9 @@ if !ERRORLEVEL! equ 0 (
     set /a WARNINGS+=1
 )
 
-REM ═══════════════════════════════════════════════════════════════
+REM ---------------------------------------------------------------
 REM STEP 5: Install npm Dependencies
-REM ═══════════════════════════════════════════════════════════════
+REM ---------------------------------------------------------------
 echo.
 echo [STEP 5/8] Installing Dependencies...
 
@@ -238,26 +235,26 @@ if !ERRORLEVEL! neq 0 (
 )
 echo [OK] Dependencies installed
 
-REM ═══════════════════════════════════════════════════════════════
+REM ---------------------------------------------------------------
 REM STEP 6: OpenCode Binary (OPTIONAL)
-REM ═══════════════════════════════════════════════════════════════
+REM ---------------------------------------------------------------
 echo.
 echo [STEP 6/8] OpenCode Binary Setup...
 echo.
-echo ╔═══════════════════════════════════════════════════════════════╗
-echo ║  NomadArch supports Binary-Free Mode!                         ║
-echo ║  You can skip the OpenCode binary and use free cloud models:  ║
-echo ║  - GPT-5 Nano, Grok Code, GLM-4.7, Doubao, and more          ║
-echo ╚═══════════════════════════════════════════════════════════════╝
+echo ===============================================================
+echo   NomadArch supports Binary-Free Mode!
+echo   You can skip the OpenCode binary and use free cloud models:
+echo   - GPT-5 Nano, Grok Code, GLM-4.7, Doubao, and more
+echo ===============================================================
 echo.
 
 set SKIP_OPENCODE=1
 echo [OK] Using Binary-Free Mode (default)
 echo [%date% %time%] Using Binary-Free Mode >> "%LOG_FILE%"
 
-REM ═══════════════════════════════════════════════════════════════
+REM ---------------------------------------------------------------
 REM STEP 7: Build UI Assets
-REM ═══════════════════════════════════════════════════════════════
+REM ---------------------------------------------------------------
 echo.
 echo [STEP 7/8] Building UI Assets...
 
@@ -278,9 +275,9 @@ if exist "%SCRIPT_DIR%\packages\ui\dist\index.html" (
     echo [OK] UI assets built successfully
 )
 
-REM ═══════════════════════════════════════════════════════════════
+REM ---------------------------------------------------------------
 REM STEP 8: Health Check and Summary
-REM ═══════════════════════════════════════════════════════════════
+REM ---------------------------------------------------------------
 echo.
 echo [STEP 8/8] Running Health Check...
 
@@ -320,9 +317,9 @@ if !HEALTH_OK! equ 1 (
 
 :SUMMARY
 echo.
-echo ╔═══════════════════════════════════════════════════════════════╗
-echo ║                    INSTALLATION SUMMARY                       ║
-echo ╚═══════════════════════════════════════════════════════════════╝
+echo ===============================================================
+echo                    INSTALLATION SUMMARY
+echo ===============================================================
 echo.
 echo   Install Directory: %TARGET_DIR%
 echo   Architecture:      !ARCH!
@@ -335,9 +332,9 @@ echo   Log File:          %LOG_FILE%
 echo.
 
 if !ERRORS! gtr 0 (
-    echo ╔═══════════════════════════════════════════════════════════════╗
-    echo ║  INSTALLATION FAILED                                          ║
-    echo ╚═══════════════════════════════════════════════════════════════╝
+    echo ===============================================================
+    echo   INSTALLATION FAILED
+    echo ===============================================================
     echo.
     echo Review the errors above and check the log file: %LOG_FILE%
     echo.
@@ -349,9 +346,9 @@ if !ERRORS! gtr 0 (
     echo.
     echo [%date% %time%] Installation FAILED with !ERRORS! errors >> "%LOG_FILE%"
 ) else (
-    echo ╔═══════════════════════════════════════════════════════════════╗
-    echo ║  INSTALLATION SUCCESSFUL!                                     ║
-    echo ╚═══════════════════════════════════════════════════════════════╝
+    echo ===============================================================
+    echo   INSTALLATION SUCCESSFUL!
+    echo ===============================================================
     echo.
     echo To start NomadArch, run:
     echo   Launch-Windows.bat

packages/electron-app/electron/main/ipc.ts

@@ -68,10 +68,23 @@ export function setupCliIPC(mainWindow: BrowserWindow, cliManager: CliProcessMan
   })
   ipcMain.handle("users:createGuest", async () => {
     const user = createGuestUser()
+    // Set up isolated environment for guest user
+    const root = getUserDataRoot(user.id)
+    cliManager.setUserEnv({
+      CODENOMAD_USER_DIR: root,
+      CLI_CONFIG: path.join(root, "config.json"),
+    })
+    await cliManager.stop()
+    const devMode = process.env.NODE_ENV === "development"
+    await cliManager.start({ dev: devMode })
+    // Set as active user
+    setActiveUser(user.id)
     return user
   })
   ipcMain.handle("users:login", async (_, payload: { id: string; password?: string }) => {
+    console.log("[IPC:users:login] Attempting login for:", payload.id, "password length:", payload.password?.length)
     const ok = verifyPassword(payload.id, payload.password ?? "")
+    console.log("[IPC:users:login] verifyPassword result:", ok)
     if (!ok) {
       return { success: false }
     }

packages/electron-app/electron/main/user-store.ts

@@ -276,10 +276,20 @@ export function deleteUser(userId: string) {
 export function verifyPassword(userId: string, password: string): boolean {
   const store = readStore()
   const user = store.users.find((u) => u.id === userId)
-  if (!user) return false
+  if (!user) {
+    console.log("[verifyPassword] User not found:", userId)
+    return false
+  }
   if (user.isGuest) return true
-  if (!user.salt || !user.passwordHash) return false
-  return hashPassword(password, user.salt) === user.passwordHash
+  if (!user.salt || !user.passwordHash) {
+    console.log("[verifyPassword] No salt or hash for user:", userId)
+    return false
+  }
+  const computed = hashPassword(password, user.salt)
+  const matches = computed === user.passwordHash
+  console.log("[verifyPassword] userId:", userId, "password:", JSON.stringify(password), "len:", password.length)
+  console.log("[verifyPassword] computed:", computed, "stored:", user.passwordHash, "matches:", matches)
+  return matches
 }
 
 export function getUserDataRoot(userId: string) {

packages/ui/src/components/auth/LoginView.tsx

@@ -1,5 +1,5 @@
 import { Component, createSignal, onMount, For, Show } from "solid-js"
-import { Lock, User, LogIn, ShieldCheck, Cpu } from "lucide-solid"
+import { Lock, User, ShieldCheck, Cpu, UserPlus, KeyRound, ArrowLeft, Ghost } from "lucide-solid"
 import toast from "solid-toast"
 import { isElectronHost } from "../../lib/runtime-env"
 import { setActiveUserId } from "../../lib/user-context"
@@ -14,43 +14,48 @@ interface LoginViewProps {
     onLoginSuccess: (user: UserRecord) => void
 }
 
+type ViewMode = "login" | "register" | "reset"
+
 const LoginView: Component<LoginViewProps> = (props) => {
     const [users, setUsers] = createSignal<UserRecord[]>([])
     const [username, setUsername] = createSignal("")
     const [password, setPassword] = createSignal("")
-    const [isLoggingIn, setIsLoggingIn] = createSignal(false)
-    const [isLoadingUsers, setIsLoadingUsers] = createSignal(true)
+    const [confirmPassword, setConfirmPassword] = createSignal("")
+    const [newPassword, setNewPassword] = createSignal("")
+    const [isLoading, setIsLoading] = createSignal(false)
+    const [mode, setMode] = createSignal<ViewMode>("login")
 
-    const getApi = () => (window as any).electronAPI || (window as any).electron
-
-    const safeInvoke = async (method: string, ...args: any[]) => {
-        const api = getApi()
-        if (!api) return null
-        const invoke = api.invoke || api.ipcRenderer?.invoke || (window as any).ipcRenderer?.invoke
-        if (!invoke) return null
-        const binder = api.invoke ? api : (api.ipcRenderer || (window as any).ipcRenderer)
-        return await invoke.call(binder, method, ...args)
+    const getApi = () => {
+        const api = (window as any).electronAPI
+        return api
     }
 
-    onMount(async () => {
+    const loadUsers = async () => {
         try {
             if (isElectronHost()) {
-                const userList = await safeInvoke("users:list")
+                const api = getApi()
+                if (api?.listUsers) {
+                    const userList = await api.listUsers()
                     if (userList && Array.isArray(userList)) {
                         setUsers(userList)
-                    if (userList.length > 0) {
+                        if (userList.length > 0 && !username()) {
                             setUsername(userList[0].name)
                         }
                     }
-            } else {
-                setUsername("web-explorer")
+                }
             }
         } catch (error) {
             console.error("Failed to fetch users:", error)
-        } finally {
-            setIsLoadingUsers(false)
         }
-    })
+    }
+
+    onMount(loadUsers)
+
+    const resetForm = () => {
+        setPassword("")
+        setConfirmPassword("")
+        setNewPassword("")
+    }
 
     const handleLogin = async (e: Event) => {
         e.preventDefault()
@@ -60,43 +65,204 @@ const LoginView: Component<LoginViewProps> = (props) => {
             return
         }
 
-        setIsLoggingIn(true)
+        setIsLoading(true)
         try {
             if (isElectronHost()) {
-                const userList = await safeInvoke("users:list")
-                if (!userList || !Array.isArray(userList)) {
-                    toast.error("Bridge failure: try restarting")
+                const api = getApi()
+                if (!api?.listUsers || !api?.loginUser) {
+                    toast.error("API bridge not ready")
                     return
                 }
 
-                const user = userList.find((u: UserRecord) => u.name.toLowerCase() === name.toLowerCase())
+                const userList = await api.listUsers()
+                const user = userList?.find((u: UserRecord) => u.name.toLowerCase() === name.toLowerCase())
 
                 if (!user) {
                     toast.error(`Identity "${name}" not found`)
                     return
                 }
 
-                const result = await safeInvoke("users:login", {
+                const result = await api.loginUser({
                     id: user.id,
                     password: password(),
                 })
 
                 if (result?.success) {
                     toast.success(`Welcome back, ${result.user.name}!`)
-                    setActiveUserId(result.user.id) // Proactively update local state
+                    setActiveUserId(result.user.id)
                     props.onLoginSuccess(result.user)
                 } else {
-                    toast.error("Invalid key for this identity")
+                    toast.error("Invalid access key")
                 }
             } else {
                 toast.success("Web mode access granted")
-                props.onLoginSuccess({ id: "web-user", name: "Web Explorer" })
+                props.onLoginSuccess({ id: "web-user", name: username() || "Web Explorer" })
             }
         } catch (error) {
             console.error("Login failed:", error)
-            toast.error("Decryption failed: check your key")
+            toast.error("Authentication failed")
         } finally {
-            setIsLoggingIn(false)
+            setIsLoading(false)
+        }
+    }
+
+    const handleGuestLogin = async () => {
+        setIsLoading(true)
+        try {
+            const api = getApi()
+            if (api?.createGuest) {
+                const guestUser = await api.createGuest()
+                if (guestUser?.id) {
+                    toast.success(`Welcome, ${guestUser.name}!`)
+                    setActiveUserId(guestUser.id)
+                    props.onLoginSuccess(guestUser)
+                } else {
+                    toast.error("Failed to create guest session")
+                }
+            } else {
+                // Web mode fallback
+                const guestId = `guest-${Date.now()}`
+                toast.success("Guest session started")
+                props.onLoginSuccess({ id: guestId, name: "Guest", isGuest: true })
+            }
+        } catch (error) {
+            console.error("Guest login failed:", error)
+            toast.error("Guest login failed")
+        } finally {
+            setIsLoading(false)
+        }
+    }
+
+    const handleRegister = async (e: Event) => {
+        e.preventDefault()
+        const name = username().trim()
+
+        if (!name) {
+            toast.error("Username required")
+            return
+        }
+        if (name.length < 3) {
+            toast.error("Username must be at least 3 characters")
+            return
+        }
+        if (!password()) {
+            toast.error("Password required")
+            return
+        }
+        if (password().length < 4) {
+            toast.error("Password must be at least 4 characters")
+            return
+        }
+        if (password() !== confirmPassword()) {
+            toast.error("Passwords do not match")
+            return
+        }
+
+        // Check if user already exists
+        const existingUser = users().find(u => u.name.toLowerCase() === name.toLowerCase())
+        if (existingUser) {
+            toast.error(`Identity "${name}" already exists`)
+            return
+        }
+
+        setIsLoading(true)
+        try {
+            const api = getApi()
+            if (!api?.createUser) {
+                toast.error("Registration unavailable")
+                return
+            }
+
+            const newUser = await api.createUser({
+                name: name,
+                password: password(),
+            })
+
+            if (newUser?.id) {
+                toast.success(`Identity "${name}" created successfully!`)
+                await loadUsers()
+                setMode("login")
+                setUsername(name)
+                resetForm()
+            } else {
+                toast.error("Failed to create identity")
+            }
+        } catch (error) {
+            console.error("Registration failed:", error)
+            toast.error("Registration failed")
+        } finally {
+            setIsLoading(false)
+        }
+    }
+
+    const handleResetPassword = async (e: Event) => {
+        e.preventDefault()
+        const name = username().trim()
+
+        if (!name) {
+            toast.error("Select an identity first")
+            return
+        }
+        if (!password()) {
+            toast.error("Current password required")
+            return
+        }
+        if (!newPassword()) {
+            toast.error("New password required")
+            return
+        }
+        if (newPassword().length < 4) {
+            toast.error("New password must be at least 4 characters")
+            return
+        }
+
+        const user = users().find(u => u.name.toLowerCase() === name.toLowerCase())
+        if (!user) {
+            toast.error(`Identity "${name}" not found`)
+            return
+        }
+
+        setIsLoading(true)
+        try {
+            const api = getApi()
+
+            // First verify current password
+            const verifyResult = await api.loginUser({
+                id: user.id,
+                password: password(),
+            })
+
+            if (!verifyResult?.success) {
+                toast.error("Current password is incorrect")
+                return
+            }
+
+            // Update password
+            const updateResult = await api.updateUser({
+                id: user.id,
+                password: newPassword(),
+            })
+
+            if (updateResult?.id) {
+                toast.success("Password updated successfully!")
+                setMode("login")
+                resetForm()
+            } else {
+                toast.error("Failed to update password")
+            }
+        } catch (error) {
+            console.error("Password reset failed:", error)
+            toast.error("Password reset failed")
+        } finally {
+            setIsLoading(false)
+        }
+    }
+
+    const switchMode = (newMode: ViewMode) => {
+        setMode(newMode)
+        resetForm()
+        if (newMode === "register") {
+            setUsername("")
         }
     }
 
@@ -108,21 +274,38 @@ const LoginView: Component<LoginViewProps> = (props) => {
                 <div class="absolute -bottom-[10%] -right-[10%] w-[40%] h-[40%] bg-purple-500/20 blur-[120px] rounded-full animate-pulse delay-700" />
             </div>
 
-            <div class="relative w-full max-w-md px-6 py-12 bg-[#141414]/80 backdrop-blur-xl border border-white/10 rounded-3xl shadow-2xl">
+            <div class="relative w-full max-w-md px-6 py-10 bg-[#141414]/80 backdrop-blur-xl border border-white/10 rounded-3xl shadow-2xl">
                 {/* Logo & Header */}
-                <div class="flex flex-col items-center mb-10">
-                    <div class="w-20 h-20 mb-6 bg-gradient-to-br from-blue-500 via-indigo-600 to-purple-700 p-0.5 rounded-2xl shadow-lg transform rotate-3">
+                <div class="flex flex-col items-center mb-8">
+                    <div class="w-16 h-16 mb-4 bg-gradient-to-br from-blue-500 via-indigo-600 to-purple-700 p-0.5 rounded-2xl shadow-lg transform rotate-3">
                         <div class="w-full h-full bg-[#141414] rounded-2xl flex items-center justify-center">
-                            <Cpu class="w-10 h-10 text-white" />
+                            <Cpu class="w-8 h-8 text-white" />
                         </div>
                     </div>
-                    <h1 class="text-3xl font-bold text-white tracking-tight mb-2">NomadArch</h1>
-                    <p class="text-gray-400 text-sm">Secure Neural Access Point</p>
+                    <h1 class="text-2xl font-bold text-white tracking-tight mb-1">NomadArch</h1>
+                    <p class="text-gray-400 text-sm">
+                        {mode() === "login" && "Secure Neural Access Point"}
+                        {mode() === "register" && "Create New Identity"}
+                        {mode() === "reset" && "Reset Access Key"}
+                    </p>
                 </div>
 
-                <form onSubmit={handleLogin} class="space-y-6">
-                    {/* User Selection */}
-                    <div class="space-y-2">
+                {/* Back button for non-login modes */}
+                <Show when={mode() !== "login"}>
+                    <button
+                        type="button"
+                        onClick={() => switchMode("login")}
+                        class="flex items-center gap-2 text-gray-400 hover:text-white transition-colors mb-4"
+                    >
+                        <ArrowLeft class="w-4 h-4" />
+                        <span class="text-sm">Back to login</span>
+                    </button>
+                </Show>
+
+                {/* Login Form */}
+                <Show when={mode() === "login"}>
+                    <form onSubmit={handleLogin} class="space-y-5">
+                        <div class="space-y-1.5">
                             <label class="text-xs font-semibold text-gray-500 uppercase tracking-wider ml-1">Identity</label>
                             <div class="relative group">
                                 <div class="absolute inset-y-0 left-0 pl-4 flex items-center pointer-events-none">
@@ -133,19 +316,16 @@ const LoginView: Component<LoginViewProps> = (props) => {
                                     placeholder="Username"
                                     value={username()}
                                     onInput={(e) => setUsername(e.currentTarget.value)}
-                                class="block w-full pl-12 pr-4 py-4 bg-[#1a1a1a] border border-white/5 rounded-2xl text-white appearance-none focus:outline-none focus:ring-2 focus:ring-blue-500/50 focus:border-blue-500/50 transition-all cursor-text"
+                                    class="block w-full pl-12 pr-4 py-3.5 bg-[#1a1a1a] border border-white/5 rounded-2xl text-white focus:outline-none focus:ring-2 focus:ring-blue-500/50 transition-all"
                                     list="identity-suggestions"
                                 />
                                 <datalist id="identity-suggestions">
-                                <For each={users()}>
-                                    {(user) => <option value={user.name} />}
-                                </For>
+                                    <For each={users()}>{(user) => <option value={user.name} />}</For>
                                 </datalist>
                             </div>
                         </div>
 
-                    {/* Password Input */}
-                    <div class="space-y-2">
+                        <div class="space-y-1.5">
                             <label class="text-xs font-semibold text-gray-500 uppercase tracking-wider ml-1">Access Key</label>
                             <div class="relative group">
                                 <div class="absolute inset-y-0 left-0 pl-4 flex items-center pointer-events-none">
@@ -153,33 +333,191 @@ const LoginView: Component<LoginViewProps> = (props) => {
                                 </div>
                                 <input
                                     type="password"
-                                placeholder="Enter password..."
+                                    placeholder="Password"
                                     value={password()}
                                     onInput={(e) => setPassword(e.currentTarget.value)}
-                                required
-                                class="block w-full pl-12 pr-4 py-4 bg-[#1a1a1a] border border-white/5 rounded-2xl text-white placeholder-gray-600 focus:outline-none focus:ring-2 focus:ring-blue-500/50 focus:border-blue-500/50 transition-all font-mono"
+                                    class="block w-full pl-12 pr-4 py-3.5 bg-[#1a1a1a] border border-white/5 rounded-2xl text-white placeholder-gray-600 focus:outline-none focus:ring-2 focus:ring-blue-500/50 transition-all font-mono"
                                 />
                             </div>
                         </div>
 
                         <button
                             type="submit"
-                        disabled={isLoggingIn() || !username()}
-                        class="w-full flex items-center justify-center gap-3 py-4 bg-gradient-to-r from-blue-600 via-indigo-600 to-purple-600 hover:from-blue-500 hover:to-purple-500 text-white font-bold rounded-2xl shadow-xl shadow-blue-900/20 transform active:scale-[0.98] transition-all disabled:opacity-50 disabled:cursor-not-allowed group"
+                            disabled={isLoading() || !username()}
+                            class="w-full flex items-center justify-center gap-3 py-3.5 bg-gradient-to-r from-blue-600 via-indigo-600 to-purple-600 hover:from-blue-500 hover:to-purple-500 text-white font-bold rounded-2xl shadow-xl transform active:scale-[0.98] transition-all disabled:opacity-50 disabled:cursor-not-allowed"
                         >
-                        <Show when={isLoggingIn()} fallback={
-                            <>
-                                <ShieldCheck class="w-5 h-5 group-hover:scale-110 transition-transform" />
-                                <span>Verify Identity</span>
-                            </>
-                        }>
+                            <Show when={isLoading()} fallback={<><ShieldCheck class="w-5 h-5" /><span>Verify Identity</span></>}>
                                 <div class="w-5 h-5 border-2 border-white/30 border-t-white rounded-full animate-spin" />
-                            <span>Decrypting...</span>
+                                <span>Verifying...</span>
                             </Show>
                         </button>
                     </form>
 
-                <div class="mt-8 text-center text-xs text-gray-600">
+                    <div class="mt-6 flex flex-col gap-4">
+                        <button
+                            type="button"
+                            onClick={handleGuestLogin}
+                            disabled={isLoading()}
+                            class="w-full flex items-center justify-center gap-2 py-3 bg-[#1a1a1a] hover:bg-[#252525] border border-white/10 text-gray-300 hover:text-white font-medium rounded-2xl transition-all disabled:opacity-50"
+                        >
+                            <Ghost class="w-5 h-5" />
+                            <span>Continue as Guest</span>
+                        </button>
+
+                        <div class="flex items-center justify-between text-sm">
+                            <button
+                                type="button"
+                                onClick={() => switchMode("register")}
+                                class="flex items-center gap-1.5 text-gray-400 hover:text-blue-400 transition-colors"
+                            >
+                                <UserPlus class="w-4 h-4" />
+                                <span>Create Identity</span>
+                            </button>
+                            <button
+                                type="button"
+                                onClick={() => switchMode("reset")}
+                                class="flex items-center gap-1.5 text-gray-400 hover:text-purple-400 transition-colors"
+                            >
+                                <KeyRound class="w-4 h-4" />
+                                <span>Reset Password</span>
+                            </button>
+                        </div>
+                    </div>
+                </Show>
+
+                {/* Register Form */}
+                <Show when={mode() === "register"}>
+                    <form onSubmit={handleRegister} class="space-y-5">
+                        <div class="space-y-1.5">
+                            <label class="text-xs font-semibold text-gray-500 uppercase tracking-wider ml-1">Choose Username</label>
+                            <div class="relative group">
+                                <div class="absolute inset-y-0 left-0 pl-4 flex items-center pointer-events-none">
+                                    <User class="w-5 h-5 text-gray-500 group-focus-within:text-green-500 transition-colors" />
+                                </div>
+                                <input
+                                    type="text"
+                                    placeholder="Enter username"
+                                    value={username()}
+                                    onInput={(e) => setUsername(e.currentTarget.value)}
+                                    class="block w-full pl-12 pr-4 py-3.5 bg-[#1a1a1a] border border-white/5 rounded-2xl text-white focus:outline-none focus:ring-2 focus:ring-green-500/50 transition-all"
+                                />
+                            </div>
+                        </div>
+
+                        <div class="space-y-1.5">
+                            <label class="text-xs font-semibold text-gray-500 uppercase tracking-wider ml-1">Choose Password</label>
+                            <div class="relative group">
+                                <div class="absolute inset-y-0 left-0 pl-4 flex items-center pointer-events-none">
+                                    <Lock class="w-5 h-5 text-gray-500 group-focus-within:text-green-500 transition-colors" />
+                                </div>
+                                <input
+                                    type="password"
+                                    placeholder="Enter password"
+                                    value={password()}
+                                    onInput={(e) => setPassword(e.currentTarget.value)}
+                                    class="block w-full pl-12 pr-4 py-3.5 bg-[#1a1a1a] border border-white/5 rounded-2xl text-white placeholder-gray-600 focus:outline-none focus:ring-2 focus:ring-green-500/50 transition-all font-mono"
+                                />
+                            </div>
+                        </div>
+
+                        <div class="space-y-1.5">
+                            <label class="text-xs font-semibold text-gray-500 uppercase tracking-wider ml-1">Confirm Password</label>
+                            <div class="relative group">
+                                <div class="absolute inset-y-0 left-0 pl-4 flex items-center pointer-events-none">
+                                    <Lock class="w-5 h-5 text-gray-500 group-focus-within:text-green-500 transition-colors" />
+                                </div>
+                                <input
+                                    type="password"
+                                    placeholder="Confirm password"
+                                    value={confirmPassword()}
+                                    onInput={(e) => setConfirmPassword(e.currentTarget.value)}
+                                    class="block w-full pl-12 pr-4 py-3.5 bg-[#1a1a1a] border border-white/5 rounded-2xl text-white placeholder-gray-600 focus:outline-none focus:ring-2 focus:ring-green-500/50 transition-all font-mono"
+                                />
+                            </div>
+                        </div>
+
+                        <button
+                            type="submit"
+                            disabled={isLoading() || !username() || !password() || !confirmPassword()}
+                            class="w-full flex items-center justify-center gap-3 py-3.5 bg-gradient-to-r from-green-600 via-emerald-600 to-teal-600 hover:from-green-500 hover:to-teal-500 text-white font-bold rounded-2xl shadow-xl transform active:scale-[0.98] transition-all disabled:opacity-50 disabled:cursor-not-allowed"
+                        >
+                            <Show when={isLoading()} fallback={<><UserPlus class="w-5 h-5" /><span>Create Identity</span></>}>
+                                <div class="w-5 h-5 border-2 border-white/30 border-t-white rounded-full animate-spin" />
+                                <span>Creating...</span>
+                            </Show>
+                        </button>
+                    </form>
+                </Show>
+
+                {/* Reset Password Form */}
+                <Show when={mode() === "reset"}>
+                    <form onSubmit={handleResetPassword} class="space-y-5">
+                        <div class="space-y-1.5">
+                            <label class="text-xs font-semibold text-gray-500 uppercase tracking-wider ml-1">Identity</label>
+                            <div class="relative group">
+                                <div class="absolute inset-y-0 left-0 pl-4 flex items-center pointer-events-none">
+                                    <User class="w-5 h-5 text-gray-500 group-focus-within:text-purple-500 transition-colors" />
+                                </div>
+                                <input
+                                    type="text"
+                                    placeholder="Username"
+                                    value={username()}
+                                    onInput={(e) => setUsername(e.currentTarget.value)}
+                                    class="block w-full pl-12 pr-4 py-3.5 bg-[#1a1a1a] border border-white/5 rounded-2xl text-white focus:outline-none focus:ring-2 focus:ring-purple-500/50 transition-all"
+                                    list="identity-suggestions-reset"
+                                />
+                                <datalist id="identity-suggestions-reset">
+                                    <For each={users()}>{(user) => <option value={user.name} />}</For>
+                                </datalist>
+                            </div>
+                        </div>
+
+                        <div class="space-y-1.5">
+                            <label class="text-xs font-semibold text-gray-500 uppercase tracking-wider ml-1">Current Password</label>
+                            <div class="relative group">
+                                <div class="absolute inset-y-0 left-0 pl-4 flex items-center pointer-events-none">
+                                    <Lock class="w-5 h-5 text-gray-500 group-focus-within:text-purple-500 transition-colors" />
+                                </div>
+                                <input
+                                    type="password"
+                                    placeholder="Enter current password"
+                                    value={password()}
+                                    onInput={(e) => setPassword(e.currentTarget.value)}
+                                    class="block w-full pl-12 pr-4 py-3.5 bg-[#1a1a1a] border border-white/5 rounded-2xl text-white placeholder-gray-600 focus:outline-none focus:ring-2 focus:ring-purple-500/50 transition-all font-mono"
+                                />
+                            </div>
+                        </div>
+
+                        <div class="space-y-1.5">
+                            <label class="text-xs font-semibold text-gray-500 uppercase tracking-wider ml-1">New Password</label>
+                            <div class="relative group">
+                                <div class="absolute inset-y-0 left-0 pl-4 flex items-center pointer-events-none">
+                                    <KeyRound class="w-5 h-5 text-gray-500 group-focus-within:text-purple-500 transition-colors" />
+                                </div>
+                                <input
+                                    type="password"
+                                    placeholder="Enter new password"
+                                    value={newPassword()}
+                                    onInput={(e) => setNewPassword(e.currentTarget.value)}
+                                    class="block w-full pl-12 pr-4 py-3.5 bg-[#1a1a1a] border border-white/5 rounded-2xl text-white placeholder-gray-600 focus:outline-none focus:ring-2 focus:ring-purple-500/50 transition-all font-mono"
+                                />
+                            </div>
+                        </div>
+
+                        <button
+                            type="submit"
+                            disabled={isLoading() || !username() || !password() || !newPassword()}
+                            class="w-full flex items-center justify-center gap-3 py-3.5 bg-gradient-to-r from-purple-600 via-violet-600 to-fuchsia-600 hover:from-purple-500 hover:to-fuchsia-500 text-white font-bold rounded-2xl shadow-xl transform active:scale-[0.98] transition-all disabled:opacity-50 disabled:cursor-not-allowed"
+                        >
+                            <Show when={isLoading()} fallback={<><KeyRound class="w-5 h-5" /><span>Reset Password</span></>}>
+                                <div class="w-5 h-5 border-2 border-white/30 border-t-white rounded-full animate-spin" />
+                                <span>Resetting...</span>
+                            </Show>
+                        </button>
+                    </form>
+                </Show>
+
+                <div class="mt-6 text-center text-xs text-gray-600">
                     Powered by Antigravity OS v4.5 | Encrypted Connection
                 </div>
             </div>

packages/ui/src/components/chat/multi-task-chat.tsx

@@ -10,6 +10,7 @@ import { addToTaskQueue, getSoloState, setActiveTaskId, toggleAutonomous, toggle
 import { getLogger } from "@/lib/logger";
 import { clearCompactionSuggestion, getCompactionSuggestion } from "@/stores/session-compaction";
 import { emitSessionSidebarRequest } from "@/lib/session-sidebar-events";
+import { detectAgentWorkingState, getAgentStatusMessage } from "@/lib/agent-status-detection";
 import {
   Command,
   Plus,
@@ -216,7 +217,36 @@ export default function MultiTaskChat(props: MultiTaskChatProps) {
 
     const store = messageStore();
     const lastMsg = store.getMessage(ids[ids.length - 1]);
-    return lastMsg?.role === "assistant" && (lastMsg.status === "streaming" || lastMsg.status === "sending");
+
+    // Basic check: streaming or sending status
+    if (lastMsg?.role === "assistant" && (lastMsg.status === "streaming" || lastMsg.status === "sending")) {
+      return true;
+    }
+
+    // Enhanced check: semantic detection for "standby", "processing" messages
+    // This catches Ollama models that output status messages and pause
+    if (lastMsg?.role === "assistant") {
+      const workingState = detectAgentWorkingState(lastMsg);
+      return workingState.isWorking;
+    }
+
+    return false;
+  });
+
+  // Get dynamic status message for display
+  const agentStatusMessage = createMemo(() => {
+    const ids = filteredMessageIds();
+    if (ids.length === 0) return "THINKING";
+
+    const store = messageStore();
+    const lastMsg = store.getMessage(ids[ids.length - 1]);
+
+    if (!lastMsg || lastMsg.role !== "assistant") {
+      return "THINKING";
+    }
+
+    const statusMsg = getAgentStatusMessage(lastMsg);
+    return statusMsg?.toUpperCase() || "THINKING";
   });
 
   // Auto-scroll during streaming - DISABLED for performance testing
@@ -539,7 +569,7 @@ export default function MultiTaskChat(props: MultiTaskChatProps) {
           <Show when={isAgentThinking()}>
             <div class="flex items-center space-x-2 px-3 py-1.5 bg-violet-500/15 border border-violet-500/30 rounded-lg animate-pulse shadow-[0_0_20px_rgba(139,92,246,0.2)]">
               <Sparkles size={12} class="text-violet-400 animate-spin" style={{ "animation-duration": "3s" }} />
-              <span class="text-[10px] font-black text-violet-400 uppercase tracking-tight">Streaming</span>
+              <span class="text-[10px] font-black text-violet-400 uppercase tracking-tight">{agentStatusMessage()}</span>
               <span class="text-[10px] font-bold text-violet-300">{formatTokenTotal(tokenStats().used)}</span>
             </div>
           </Show>
@@ -846,7 +876,7 @@ export default function MultiTaskChat(props: MultiTaskChatProps) {
                         <div class="w-1 h-1 bg-indigo-400 rounded-full animate-bounce" style={{ "animation-delay": "150ms" }} />
                         <div class="w-1 h-1 bg-indigo-400 rounded-full animate-bounce" style={{ "animation-delay": "300ms" }} />
                       </div>
-                      <span class="text-[9px] font-bold text-indigo-400">{isAgentThinking() ? "THINKING" : "SENDING"}</span>
+                      <span class="text-[9px] font-bold text-indigo-400">{isSending() ? "SENDING" : agentStatusMessage()}</span>
                     </div>
                   </Show>
                 </div>

packages/ui/src/lib/agent-status-detection.ts

@@ -0,0 +1,249 @@
+/**
+ * Agent Status Detection Module
+ * 
+ * Provides intelligent detection of when an agent is still "working" even after
+ * streaming has technically completed. This handles cases where:
+ * 1. Agent outputs "standby", "processing", "working" messages
+ * 2. Agent is in multi-step reasoning mode
+ * 3. Ollama models pause between thinking and output phases
+ */
+
+import type { MessageRecord } from "../stores/message-v2/types"
+
+// Keywords that indicate the agent is still processing
+const WORKING_KEYWORDS = [
+    "standby",
+    "stand by",
+    "processing",
+    "please wait",
+    "working on",
+    "analyzing",
+    "thinking",
+    "computing",
+    "calculating",
+    "evaluating",
+    "generating",
+    "preparing",
+    "loading",
+    "fetching",
+    "retrieving",
+    "in progress",
+    "one moment",
+    "hold on",
+    "just a sec",
+    "give me a moment",
+    "let me",
+    "i'll",
+    "i will",
+    "checking",
+    "scanning",
+    "searching",
+    "looking",
+    "finding"
+] as const
+
+// Keywords that indicate the agent has finished
+const COMPLETION_KEYWORDS = [
+    "here is",
+    "here's",
+    "here are",
+    "done",
+    "complete",
+    "finished",
+    "result",
+    "solution",
+    "answer",
+    "output",
+    "summary",
+    "conclusion",
+    "final",
+    "successfully",
+    "implemented",
+    "fixed",
+    "resolved",
+    "created",
+    "updated"
+] as const
+
+// Patterns that strongly indicate agent is still working
+const WORKING_PATTERNS = [
+    /stand\s*by/i,
+    /processing\s*(complete\s*)?data/i,
+    /please\s+wait/i,
+    /working\s+on/i,
+    /analyzing/i,
+    /\bwait\b/i,
+    /\bone\s+moment\b/i,
+    /\bhold\s+on\b/i,
+    /\.\.\.\s*$/,  // Ends with ellipsis
+    /…\s*$/,      // Ends with unicode ellipsis
+] as const
+
+/**
+ * Extracts text content from a message's parts
+ */
+function extractMessageText(message: MessageRecord): string {
+    const textParts: string[] = []
+
+    for (const partId of message.partIds) {
+        const part = message.parts[partId]
+        if (part?.data) {
+            const data = part.data as Record<string, unknown>
+            if (data.type === "text" && typeof data.text === "string") {
+                textParts.push(data.text)
+            }
+        }
+    }
+
+    return textParts.join("\n")
+}
+
+/**
+ * Gets the last N characters of a message for keyword detection
+ */
+function getRecentContent(message: MessageRecord, charLimit = 500): string {
+    const fullText = extractMessageText(message)
+    if (fullText.length <= charLimit) {
+        return fullText.toLowerCase()
+    }
+    return fullText.slice(-charLimit).toLowerCase()
+}
+
+/**
+ * Checks if the message content indicates the agent is still working
+ */
+export function detectAgentWorkingState(message: MessageRecord | null | undefined): {
+    isWorking: boolean
+    reason?: string
+    confidence: "high" | "medium" | "low"
+} {
+    if (!message) {
+        return { isWorking: false, confidence: "high" }
+    }
+
+    // If message status is streaming or sending, definitely working
+    if (message.status === "streaming" || message.status === "sending") {
+        return { isWorking: true, reason: "Active streaming", confidence: "high" }
+    }
+
+    // Get recent content to analyze
+    const recentContent = getRecentContent(message)
+
+    if (!recentContent) {
+        return { isWorking: false, confidence: "high" }
+    }
+
+    // Check for working patterns with high confidence
+    for (const pattern of WORKING_PATTERNS) {
+        if (pattern.test(recentContent)) {
+            return {
+                isWorking: true,
+                reason: `Pattern match: ${pattern.source}`,
+                confidence: "high"
+            }
+        }
+    }
+
+    // Check if recent content ends with working keywords
+    const lastLine = recentContent.split("\n").pop()?.trim() || ""
+
+    for (const keyword of WORKING_KEYWORDS) {
+        if (lastLine.includes(keyword)) {
+            // Check if there's also a completion keyword nearby
+            const hasCompletionNearby = COMPLETION_KEYWORDS.some(ck =>
+                recentContent.slice(-200).includes(ck)
+            )
+
+            if (!hasCompletionNearby) {
+                return {
+                    isWorking: true,
+                    reason: `Working keyword: "${keyword}"`,
+                    confidence: "medium"
+                }
+            }
+        }
+    }
+
+    // Check message age - if very recent and short, might still be working
+    const now = Date.now()
+    const messageAge = now - message.updatedAt
+    const contentLength = extractMessageText(message).length
+
+    // If message was updated very recently (< 2s) and content is short
+    if (messageAge < 2000 && contentLength < 100) {
+        return {
+            isWorking: true,
+            reason: "Recently updated with short content",
+            confidence: "low"
+        }
+    }
+
+    return { isWorking: false, confidence: "high" }
+}
+
+/**
+ * Check if the last assistant message indicates agent is still conceptually working
+ */
+export function isAgentConceptuallyThinking(
+    messages: MessageRecord[],
+    lastAssistantMessage: MessageRecord | null | undefined
+): boolean {
+    if (!lastAssistantMessage) {
+        return false
+    }
+
+    // Check if message status indicates active work
+    if (lastAssistantMessage.status === "streaming" ||
+        lastAssistantMessage.status === "sending") {
+        return true
+    }
+
+    // Use semantic detection
+    const workingState = detectAgentWorkingState(lastAssistantMessage)
+    return workingState.isWorking
+}
+
+/**
+ * Get a user-friendly status message for the current agent state
+ */
+export function getAgentStatusMessage(
+    message: MessageRecord | null | undefined
+): string | null {
+    if (!message) {
+        return null
+    }
+
+    const workingState = detectAgentWorkingState(message)
+
+    if (!workingState.isWorking) {
+        return null
+    }
+
+    if (message.status === "streaming") {
+        return "Streaming..."
+    }
+
+    if (message.status === "sending") {
+        return "Sending..."
+    }
+
+    // Based on reason
+    if (workingState.reason?.includes("standby") ||
+        workingState.reason?.includes("stand by")) {
+        return "Agent processing..."
+    }
+
+    if (workingState.reason?.includes("processing")) {
+        return "Processing..."
+    }
+
+    if (workingState.reason?.includes("analyzing")) {
+        return "Analyzing..."
+    }
+
+    if (workingState.reason?.includes("ellipsis")) {
+        return "Thinking..."
+    }
+
+    return "Working..."
+}

packages/ui/src/lib/user-context.ts

@@ -104,14 +104,11 @@ export async function initializeUserContext(): Promise<void> {
     console.log(`[UserContext] Initializing... host=${isElectronHost()}`)
     try {
         if (isElectronHost()) {
-            const api = (window as any).electronAPI || (window as any).electron
-            if (api) {
-                console.log(`[UserContext] Requesting active user from host IPC...`)
-                const invoke = api.invoke || api.ipcRenderer?.invoke || (window as any).ipcRenderer?.invoke
-                if (!invoke) throw new Error("No IPC invoke method found")
-
-                const binder = api.invoke ? api : (api.ipcRenderer || (window as any).ipcRenderer)
-                const activeUser = await invoke.call(binder, "users:active")
+            const api = (window as any).electronAPI
+            if (api && api.getActiveUser) {
+                console.log(`[UserContext] Requesting active user via api.getActiveUser()...`)
+                const activeUser = await api.getActiveUser()
+                console.log(`[UserContext] getActiveUser result:`, activeUser)
 
                 if (activeUser?.id) {
                     console.log(`[UserContext] Host has active session: ${activeUser.id}`)
@@ -121,7 +118,7 @@ export async function initializeUserContext(): Promise<void> {
                     setActiveUserId(null)
                 }
             } else {
-                console.warn(`[UserContext] Electron detected but no IPC bridge found. Falling back to web mode.`)
+                console.warn(`[UserContext] electronAPI.getActiveUser not found. Falling back to web mode.`)
                 await handleWebInit()
             }
         } else {

packages/ui/src/stores/session-status.ts

@@ -4,6 +4,7 @@ import type { MessageRecord } from "./message-v2/types"
 import { sessions } from "./sessions"
 import { getSessionCompactionState } from "./session-compaction"
 import { messageStoreBus } from "./message-v2/bus"
+import { detectAgentWorkingState } from "../lib/agent-status-detection"
 
 function getSession(instanceId: string, sessionId: string): Session | null {
   const instanceSessions = sessions().get(instanceId)
@@ -159,6 +160,15 @@ export function getSessionStatus(instanceId: string, sessionId: string): Session
     return "working"
   }
 
+  // Enhanced: Check if last assistant message content suggests agent is still working
+  // This catches Ollama models that output "standby", "processing" messages and pause
+  if (lastRecord && lastRecord.role === "assistant") {
+    const workingState = detectAgentWorkingState(lastRecord)
+    if (workingState.isWorking && workingState.confidence !== "low") {
+      return "working"
+    }
+  }
+
   return "idle"
 }